Flow+ 2" Wafer Valve with Manual Lever

1. ISO5211 mounting flange allows for easy actuation
2. 17-4PH SS blow-out proof shafts
3. A395 ductile iron body
4. Bubble tight and bi-directional up to 250 PSI
5. Cartridge seat with phenolic backing seat provides dimensionally stable seating surface, minimal seat wear and extends seat life
6. Two molded in primary shaft seals on upper and lower seal bore I.D.
7. Three additional shaft seals
8. Two upper and one lower F4 bushing to provide additional support
9. Set screws to maintain seat alignment on dead-end service

Resources:

Technical literature