Main Features

• 100 ms cycle time, i.e. also suitable for fast control loops
• Up to three freely configurable analog outputs, e.g. as process value output
• Up to 8 relay outputs
• Customer-specific linearization for all sensors
• Settings can be blocked via password and internal switch for high security
• Extended temperature range up to 131°F (55°C) allows mounting close to the process
• Modular design
• Easy 2-point or offset measurement correction
• Logical combination of digital outputs, e.g. for general alarm
• RS 422/485 Modbus RTU interface or Ethernet
• USB port
• Configuration interface
• Optional built-in transmitter power supply
• Splash-water proof front IP 66
• Setup-Wizard

HMI Display

• Graphical, clearly readable red or green display (160 x 80 pixels)
• Dual colour display (green / red)
• Colour changes e.g. on alarm
• Multi-language option (English, French, German, Italian, Spanish)
• Custom splash-screen on startup (bitmap file)
• Alarm status view
• Trend view
• Status LEDs for heating / cooling
• Self-tuning function and alarm

Configuration & Operation

• Convenient setup Wizard for simple configuration (inputs, alarms, outputs, communication, and real-time clock)
• Universal input for thermocouple, RTDs, and standard signals (mA, mV or V)
• Versatile output options: Relay, SSR driver, Triac, and standard signals (max. 8) for precise adaptation to the process
• Digital inputs (2 max) for setpoint selection, programmer control, datalogger start/stop, control output enable/disable or auto/manual control
• Configurable menus
• Upload/download recipes possible with Protherm 9800 Production Management
• Software
• Password protected Supervisor and Configuration mode
• Pre-tune and self-tune function
• Master-slave configuration for multi-zone applications

Programmer (Optional)

• Up to 255 segments for free allocation in max. 64 programs
• Ramp, Dwell, Hold, Loop, or Jump to other program
• User-defined program names
• Delayed or real-time (date/time) program start
• Up to 5 event outputs

Datalogger (Optional)

• Recording of historic process data for analysis or reporting
• Data exported as *.csv files via front USB port or rear interface
• Logging of process values, setpoints or alarms (including min, max, and average)
• Run-then-stop or FIFO (first in - first out) buffer recording
• Logging intervals from 1sec to 30 minutes

Plug-In Unit

Protherm 10 program controllers are built as plug-in modules. This permits a controller to be replaced very quickly without disturbing the wiring. All that is needed is a screwdriver to release the front catch.